tad
Kottpa Members
Posts: 28
|
Post by tad on Feb 27, 2012 12:10:09 GMT -6
Msd Power Grid 7 with controller. Used for around 20 passes. $625
Pro fab 1 inch quick change gears 400 and 450 $100 each
4wd roller 79 ford ton chassis ho72 rear welded solid. Dana 60 front with 35 spline axles detroit locker standard rotarion. 4.56 gears. 205 transfer case and t18 transmission. 97 ford body. Cab is sitting on the chassis but not mounted. Bed has been gutted but will need fram work built. 31x15.50 bar tires. $3500 with body $2500 without.
11" Crowerglide 6 stand top Has around ten passes on it $600
Narrowed H110 rear end with 14 bolt hubs 8 lug. around 45 inches from hub to hub. 6.17 gears have a spare axle for the rear end $400
Stahl down swept bbc headers $400
514 bbf short block crower rods, wisco pistons for A style heads $2000
billet 4.15 stroke bbf crankshaft long snout standard mains bbc rods. Was installed but never ran $1000
78 ford truck dana 60 front and rear 4 speed 360 engine. Be a good truck to build $1500
BBF upswept headers $300
Lakewood bbf bell housing $300
|
|
tad
Kottpa Members
Posts: 28
|
Post by tad on Jul 11, 2012 16:54:15 GMT -6
ttt
|
|
mhp
Kottpa Members
Posts: 12
|
Post by mhp on Jul 31, 2012 20:18:34 GMT -6
Do you still have the Crower glide? Will it fit BBC 4 speed
|
|
tad
Kottpa Members
Posts: 28
|
Post by tad on Aug 1, 2012 18:04:00 GMT -6
It is just the hat part. You will need flywheel floaters and discs to fit what you are running.
|
|
tad
Kottpa Members
Posts: 28
|
Post by tad on Feb 28, 2013 13:20:39 GMT -6
ttt
|
|